Clik here to view.
Blimp project
Hello everyone, this year I as the project, Blimp.we have 2 NXT (a receiver, transmitter) (there are 3 motors drones, and a servo hs-422, we use a motor of NXT transmitter we go call it Joystick to...
View Articlehow to change picture ring value in array based array index value...
hi Can any one tell, how to change the picture ring value of the within an array based an array index position.I am trying to show different pictures within an array based on index...
View Articletimed loop termination
My application involves a closed-loop system where I control current which heats a resistive load. I want to ramp up the current until a specifed temperature is measured, dwell at that...
View ArticleDAQ devices don't show up in LabView Measurement IO
My DAQ devices are visible in NI-MAX 5.5.1 and operate correctly. They also work in LabView Signal Express 2012. However, when I installed LabView 2013 and tried to use them, they don't show up in...
View ArticleControl de motor paso a paso con Arduino
Saludos!!! tengo una gran duda, quiero controlar un motor paso a paso unipolar de la forma convencional usando un arreglo de transistores Darlington, lo logre facilmente usando el siguiente skecth de...
View ArticleHow do i set the chart to show me the results for the last 3 minutes?
I am simulating a data aquiring of 2 pressures and I don't know how to set the chart/graph to show me the results for the last 3 minutes.
View ArticleProblem: Fitting Lev-Mar with Error Function
Hi everyone, I have very little experience with LabVIEW and I'm trying for the first time to do some NonLinear Curve fit for some data I have.I've searched in forums for almost a day and couldn't find...
View ArticleThe current chassis settings cannot be deployed to this controller.
Hello, I have two identical cRIO-9022 with cRIO-9114 which should work with the scan engine because I don't have the FPGA licence. I have upgraded to LabVIEW 2012 on both. One is working fine but the...
View Articledaq assistance setting
Hello, I am running a scaled down earthquake data that I retrieved from the USGS website and placed accelerometers on the mini shake table to verify that the shake table can replicate an...
View ArticleWrite To Measurement Duplicate Timestamps
Hello, I'm currently reading voltage data serially via USB (COM port) and I'm trying to use the "Write to Measurement File" block to log some of the data that gets passed through. For both cases, when...
View ArticleRT programming for cRIO/sbRIO *.ctl cluster
See the attached! For a *.ctl (control) that's a cluster: 1. How is Index Display added? For the attached example, I know it is displayed by Right Click -->Visible Items. But when created from...
View ArticleBreak out of Timer at Stop event
Hello, I have a producer/consumer architecture. In the consumer loop I have a elapse timer which runs within a while loop as shown in the attachment. My quesiton is how to break the elapse timer when...
View ArticleBug in disabled elements of array?
Hi guys. I'm having an strange behavior of the disabled elements of an array. Those elements are clusters. I guess it's a bug because it happens even while the program isn't running. I recorded a video...
View ArticleAutomatically click OK or close LabVIEW popup dialog box
I am able to automate user actions on any front panels within the project by modifying its values (signaling) through VI References, but I can't figure out how to access a popup dialog box to...
View Articledigital(sw-time) and analog(continously) in one graph?
Hello, i have usb-6008 when (DI is sw-timed) and AI when i want (continous sampled) and then the both signal show in one graph, is it possible, please could you writte me how can i do it?
View ArticleDifference between value change in property node and local variable
Hello i was going through the property node and i found out the value change function in it. i saw some tutorials and i think its function is very similar to local variables. Pl correect me if i am...
View ArticleRobotic module Question
Hi alli have some question about the robotic module.i already have a DH table for my robto arm.Now i am trying to input this DH parameters into Labview.I saw the example of inverse kinematis for puma...
View ArticleHow to make a led drop in an array.
Hi guys, Basically what I want, is when I push the okay button. The corresponding led in the array drops down and stays on true. So when I push the okay button again on the right time, in the same row...
View Articlehow to send and receive data from wireless module uart (200m range-433MHz)
I'm trying to send data from pc or labtop to arduino by two wireless modules one connected to pc and the other one connected to arduino-mega this happens in a robotic car moving by two servo motors and...
View ArticleUsing LabVIEW code in c#
Hi could you please let me know how is the best way of using LabVIEW code in c#. I see there are 2 options , making a dll or ,NET interop. Could you please let me know which one is better I also have...
View Article