Hi there,
I am finding issues using my PCI-6254 (M-series) card. The problem was highlighted to me as automated reading/tests were failing in my setup. Upon examination the AI card was found to be malfunctioning. I resorted to NI-Max in order to find anything and following issues were found.
1. A constant reading of -10V was appearing at all the channels even no external source was connected to the card.
2. Card's temperature was being showed to be 1000 C (which obviously was erroneous)
3. Card's due external calibration date was found to be well exceeded.
4. Reset and self test was happening but self calibration halted showing an error 200545.
any solution to this problem?
Thanks in anticipation